James Loudspeaker EMB1000 10” Powered Subwoofer
The designation “EMB” stands for “Energy Multiplied Bandpass.” Energy multiplying is achieved by creating two precisely designed sealed chambers, a rear chamber with a high-performance internal driver coupled to a front chamber that focuses the energy through a spun aluminum pneumatically-coupled passive radiator. At various bass frequencies, the phase-coupled radiator is displaying a greater excursion and thus greater output than the internal powered driver. The high performance internal driver is housed in one of the two critically damped control chambers which store and release tremendous energy generated by the driver, which are then released through the phase-coupled radiator. This design reduces distortion to levels well below other active/passive or signal compared designs while at the same time increasing sonic output and impact.
In the past, when designing small subwoofers, small size and small air volume dictated design compromises that resulted in high distortion and shallow bass, thus limiting the performance. The energy-multiplied bandpass design produces bass as if the enclosure were much larger than its actual size. Now, one small subwoofer can produce clearer, deeper bass acoustics than any other small subwoofer. Simply put, the EMB1000 is the first small subwoofer to more than rival the sound quality of much larger models. Inside the cabinet features a specially designed 10” woofer and pneumatically phase coupled passive radiator, both with aluminum cones and rubber surrounds. The EMB1000 subwoofer has been tuned to perform from 25Hz to 150Hz! The result of this redefining design is a fluid stream of high-volume, virtually distortion-free bass.
The EMB1000 also comes equipped with a 600 watt class D Plate amplifier, taking the guess-work out of finding the right amplifier to power this incredible compact subwoofer.
Frequency Response - 25-150Hz +/-3dB , Sensitivity - 90dB 2.83V /1m , Woofer - (2) 10" Active/Passive , Enclosure - MDF (Medium-Density Fibreboard) , Finishes - Matte and Gloss Black , Height - 12.76 in (324.10 mm) , Width - 12.13 in (308.10 mm) ,Depth - 16.69 in (423.93 mm) , Net Weight - 41 lbs (18.60 kg) , Amplifier Power - Built in 600W
Retails for $1,800.00 Now on sale for $799.99
Come in for incredible Cash and Carry price!!!
Revel F-35 Tower Speakers
The Revel F35 is a true full range 2 1/2-way 5.25” floorstanding loudspeaker that was designed to provide true high-end sound quality. It will deliver an impressive combination of wide frequency range, uncompressed dynamic range and low distortion across the entire audible spectrum.
High frequency response in the Revel F35 is supported by 1 inch aluminum dome tweeters that were derived from Revel’s Performa3 series. Low/Mid range frequency response is supported by 5.25” Aluminum cone woofers featuring low-distortion motor-structures for greater clarity and accuracy with improved sensitivity and output capability.
The patented wave guide design improves tweeter to woofer blend and significantly improves off-axis response for consistent performance over a wide listening area. In doing this we sacrificed no details by making sure no fasteners were visible allowing the speaker to show enhancing smooth lines of the cabinet and magnetically attached grilles. To finish the enclosure we selected high gloss black and white finishes to highlight the features of this beautiful speaker.
Revel B-10 Gloss White
The B10 is a powerful 800 watt 10” powered subwoofer, designed to provide powerful and clear low frequency response. The 800 watt RMS (1600W peak) amplifier powers the voice coil to provide ample power for the driver’s large diaphragm area and long-excursion capability.
Come in for incredible price
The Revel M55XC is a 2-way 5.25-inch / 130mm Extreme Climate outdoor loudspeaker designed to deliver true high-performance Revel sound while withstanding the harsh environments of locations that are hot, cold, damp, humid or wet.
Retail: $600 pair
Come in for your best price on these great speakers!
They're Back and Better than ever!!!
-Professional-Style Headphones for monitoring your recordings, high-fidelity listening
-40 MM Diameter Drivers to provide wide surface area for superb dynamics, deep bass down to 5 Hz
-Wide, Padded Headband distributes the headphone's weight over a wide area; reduced pressure means comfortable listening for hours on end
-Sony UniMatch Plug with fixed mini plug for portable use and detachable phone plug for home hi-fi use
-Oval Earpads for extra isolation
-Copper-Clad Aluminum voice coil wire for low mass, high heat conduction; provides superb power handling
-Rugged Design for heavy-duty use
-Circum-Aural Design reduces noise from the outside world
-Oxygen-Free Copper Litz Cord for maximum conductivity, minimum noise
-Folding Design for compact storage, easy portability
Original Price $99.99
Musicians can truly appreciate the return of these great headphones.
One of the top of the line studio monitor headphone for the past 40 years.